7 solder-in style high temp emi filters zz series ?.118 dia. ?circuits available - c the zz series is intended for use as a high reliability alternative to a commonly available commercial filter type. due to its smaller body diameter, capacitance is limited. it does provide effective filtering in the microwave frequency spectrum from 100 mhz through 26 ghz. designed to be soldered into a package, bracket or bulkhead (and maintain hermeticity), it is ideal for high impedance circuits where large capacitance values are not practical. alternate lead lengths or special capaci- tance values are available upon request. custom packages or bracket assemblies utilizing this feedthru can be furnished to your specifications. ?high temperature construction with- stands 300? installation temperatures. ?features rugged monolithic discoidal capacitor construction. ?glass hermetic seal on one end with epoxy seal on the opposite end. ?high purity gold plating provides excel- lent solderability or compatibility with thermal and ultrasonic wire bonding. 1. finish: gold standard ? silver and solder coat available 2. material: case: cold rolled steel leads: alloy 52 steel 3. operating temperature range: -55? to +125? 4. insulation resistance: at 25?: 1,000 megohm-microfarad min., or 100,000 megohms min., whichever is less at 125?: 100 megohm-microfarad min., or 10,000 megohms min., whichever is less 5. dielectric withstanding voltage (dwv): r-level designs: 2.0 times rated dc voltage class b, class s designs: 2.5 times rated dc voltage 6. dc resistance (dcr): .01 ohm, maximum 7. dissipation factor (df): 3% maximum 8. rated dc current: 5 amps, maximum 9. maximum installation temperature: 300? 10. supplied with 60/40 solder preform for easy installation specifications .118 .002 .020 .005 .110 .005 .140 .020 .400 .020 glass seal .140 .005 .030 .002 0.05 (.002) 3.05 (.120) 0.13 (.005) 3.43 (.135) 0.51 (.020) 3.56 (.140) 1.02 (.040) 3.68 (.145) 2.79 (.110) 10.16 (.400) 2.95 (.116) ? notes: 1. glass seal on end opposite flange. 2. metric equivalent dimensions given for information only. millimeters (inches) c zz1 circuit diagrams standard configuration (see note 1) applications characteristics (see note 2)
8 solder-in style high temp emi filters zz series ?.118 dia. ?circuits available ?c insertion loss 2 per mil-std-220, +25? avx current dc cap 1 11 0 100 1000 10 p/n amp ckt voltage min. mhz mhz mhz mhz ghz zz1c3-250h 5 c 50 25 10 15 zz1c3-500h 5 c 50 50 1 15 25 zz1c3-101h 5 c 50 100 3 20 30 zz1c3-102h 5 c 50 1000 4 20 31 55 zz1c3-152h 5 c 50 1500 5 21 42 55 zz1a3-250h 5 c 100 25 10 15 zz1a3-500h 5 c 100 50 1 15 25 zz1a3-101h 5 c 100 100 3 20 30 ZZ1A3-102H 5 c 100 1000 4 18 36 55 zz1a3-152h 5 c 100 1500 5 21 42 55 zz1b3-250h 5 c 200 25 10 15 zz1b3-500h 5 c 200 50 1 15 25 zz1b3-101h 5 c 200 100 3 20 30 zz1b3-102h 5 c 200 1000 4 18 36 55 1 decimal point values indicate capacitance in microfarads. non-decimal point values indicate capacitance in picofarads. 2 insertion loss limits are based on theoretical values. actual measurements may vary due to internal capacitor r esonances and other design constraints. for special multi-unit assemblies see multi-component filter brackets section. specifications
|
